Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment Overview:
Microcomputer controlled electronic universal testing machine is mainly used in the maximum test force of 100kN plastic, metal, automotive industry, building materials, textiles, composite materials tensile, compression, bending, shearing, stripping, tearing, bursting and other mechanical properties test。Accessories such as high and low temperature box, high temperature furnace, automatic extension meter can be selected to meet a wider range of test needs。
Relevant standards:
GB/T 228.1 "Metal materials tensile test - Part 1: Test method at room temperature"
GB/T 232 "Bending Test Method for Metal Materials"
GB/T 7314 "Metal material compression test method at room temperature"
GB/T 16491 "Electronic Universal Testing Machine"
GB/T 2611 "General Technical Requirements for Testing Machine"
JJG 139 Tensile, Pressure and Universal Testing Machine
JJG 475 Electronic Universal Testing Machine
Technical parameters:
Specification and model | ETM105D | ETM504D |
Maximum test force | 100kN | 50kN |
Accuracy class | 0.5级 | |
Relative error of test force indication value | ±0.5% | |
Test force measurement range | 0.4%~100%FS | |
Test force resolution | 1/500000FS | |
Force control speed adjustment range | 0.005% ~ 5%FS/s | |
Relative error of force control speed | Within ±1% of the set value | |
Deformation resolution | 1/500000FS | |
Deformation measuring range | 0.2%~100%FS | |
Relative error of deformation indication | Set the value ±0.5%以内 | |
Deformation rate adjustment range | 0.02% ~ 5%FS/s | |
Relative error of beam displacement indication | ±0.5%以内 | |
Relative error of beam moving speed | Set speed > 0.01mm/min, the set value is ±0.5%以内 Set speed < 0.01mm/min, ±1 of the set value.0%以内 | |
Displacement resolution | 0.04μm | |
Beam speed adjustment range | 0.005 to 1000mm/min | |
Effective test width | 600mm | |
Maximum travel of moving beam | 1150mm (single space) /1050mm (double space) | |
Rated power | 1.8kW | |
Rated voltage | AC220V, 50Hz | |
重量 | About 1200kg |
The equipment is suitable for plastics, metals, automotive industry, textiles, building materials, food packaging, composite materials tensile bending, stripping shear test, Baosteel Zhanjiang Group, Guangzhou Zengcheng Zhengyuan construction engineering quality testing center, Qinghai University mechanics laboratory, etc., all use the equipment。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763