Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
This file is based on GB/T1.1-2020 Standardization Guidelines Part 1: Rules for the structure and drafting of standardization Documents
起草。
This document replaces GB175-2007 "General Purpose Portland Cement" as compared to GB175-2007 except for structural adjustments and editorial changes
In addition, the main technological changes are as follows:
a) The requirements for cement composition have been changed (see 5.1,2007 version 5.1);
b) The requirement of "secondary (including) or more" for natural gypsum has been deleted (see 5 of the 2007 edition).2.2.1);
c Changed the technical requirements for granulated blast furnace slag or granulated blast furnace slag powder, fly ash, volcanic ash mixture (see 5.2.3、
5.2.4 和5.2.5,2007 version 5.2.3);
d) The provision for "active mixed materials" and "inactive mixed materials" has been deleted (see 5 of the 2007 edition.2.3、5.2.4);
e) Changed the requirements for limestone and sandstone and increased the test method for methylene blue values (see 5.2.6,2007 version 5.2.4);
f) The "kiln ash" material has been removed (see 5 of the 2007 edition.2.5);
g) The 32 of composite Portland cement was deleted.5、32.5R strength rating (see 6 for the 2007 version).3);
h) Increased limits and methods for determination of water-soluble chromium (V) (see 7.2和8.3);
i) The requirements for low-alkali cement have been changed (see 7.3,2007 version 7.2);
j) Added the requirement of autoclavation stability and listed it as a type inspection item (see 7.4.2.2、9.2.2);
k) The 3d compressive strength index of each strength grade of cement has been changed (see 7.4.3,2007 version 7.3.3);
l Changed fineness requirements (see 7.4.4,2007 version 7.3.4);
m) Increased limits and methods of determination of radionuclides in cement (see 7.5和8.9);Gangge wechat 11948660
n) Changed component determination requirements (see 8.1,2007 version 8.1);
o) The provision for production capacity below 10X10*t in "Numbering and sampling" has been deleted (see 2007 edition 9.1);
p) Changed the factory inspection items (see 9.2.1,2007 version 9.3);
q) Requirements for type inspection and inspection frequency and rules for determination have been added (see 9.2.2、9.3.2);
r) Increased requirements for product quality certification materials (see 9.4);
s) changed the requirements of the inspection report (see 9.5,2007 version 9.5);
t) The provisions on which acceptance is based have been changed (see 9.6.1,2007 version 9.6.1);
u) Changes to the regulations of inspection bodies in the event of quality disputes (see 9.6.2、9.6.3. 2007 version 9.6.2、9.6.3);
v) The packing regulations have been changed (see 10.1. 10 for the 2007 edition.1)。
The electro-hydraulic servo press and the electronic compression and folding testing machine can be matchedThe compressive strength of Portland cement was tested。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763